高电压值小瞬时电流检验仪（耐电弧放电检验仪）-（折算机调整）

High voltage low current tester (arc resistance tester) - (computer control)

车辆公司名称：耐电弧试验机

Product name: electric arc resistance tester

好产品机型：NDH-A

Product model: NDH - A

无法要求：GB/T 1411-2002《固态物绝缘层原材料耐高压得很低的直流电压电孤击穿的检测》（共同IEC  61621-1997）及ASTM D495等标准的的标准设置制做的，并复合IEC 149、UL 746A等可靠性试验工艺

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主要采用比率及用途：

本经过多次实验发现机是假设按照应运于同步电机、小家电和小型小家电等职业的安装电工用pp塑料管、环氧光敏树脂胶和电隔热电阻漆等电隔热电阻物料的耐脉冲耐磨性认定，主应用于粉状电隔热电阻物料如：pp塑料管、贴膜、环氧光敏树脂、矿石、陶瓷制品、玻璃纸、电隔热电阻油、电隔热电阻漆、硬纸板等材质的耐脉冲耐磨性公测；

本检测机由统计机管控正常运行，就能够显现之前工作壮态及工作准确时间，工作结速后并保管之前工作数据表格，并可打印图片.标准的实验数据数据。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为左右三合一型式，上面为作业软件，上面为试验台箱。

2 本品牌用于*新自动化调控枝术，根据采用方式（IEC或ASTM）可重新实行检测，并在笔记本苹果电脑提示试验检测的时候和报告。

3 **效能更好，抗抑制效果强，试验可靠性强，精密较高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 焊弧通断时期计算误差：大于 ±10ms

2 调压器发热量：2kVA

3 固定耐压试验电压值：12.5kV

4 试验检测电流值准确度：±3%

5 电流量控制gps精度：±10%  电压检测的精度等级：1.5%

6 金属电极对试件材料工作压力：（0.5±0.05）N

7 探针板材：钨棒

8 电极材料的距离：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 用区域室内温度：（23±2）℃

10 应用生活环境室内湿度：（50±5）%

11 外接电源：220V±5%  50Hz  10A

12 实验    方式方法：   执行标准/美标/10 mA 连续性/20 mA 接连/30 mA间断性/40 mA间隔

13 耐压试验应用程序下列：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 食品具体型号：

NDH-A    耐弧光检测仪-微机控住

NDH-B    耐电弧焊接试验检测仪-触感屏掌控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！